Quote cart is empty. |
- Blenders
- Cleaning Systems
- Coaters
- Compensators
- Conveyor Systems
- Dispensing Systems
- Drum Equipment
- Drum Handlers
- Drums
- Flanges
- ForkLifts
- Funnels & Flow Aids
- Granulation Equipment
- Granulation Systems
- IBCs
- Lifters
- Mobile Weighing
- Pallet Jacks
- Pallets
- Powder Transfer Systems
- Single-use Containment
- Tuggers / Movers
- Valves
- Vessels
Sampling Valves
Standard Size Sampling Valve - 1" and 2"
- Product Code:
STVAL-FAM125C
-
Type 125A (2" size) and Type 130C (1" size) are the standard sampling valves by Famat, the world leader in...See Tech Specs Below
- Sample Type125C - 2" size130C - 1" size
High Containment Docking Valve - Automatic
Andocksysteme offers a complete range of split butterfly valves and related systems for safe handling of potent compounds. The valves are offered in two seal type versions, depending on the containment level (or if solvents are used): White EPDM or white PTFE (teflon), both are FDA quality materials.
Andocksysteme valves have been tested in three separate private studies in accordance with ISPE SMEPAC protocols (Abbott Labs, Hoffmann-La Roche, and Novartis) and have achieved the following results
Valve with PTFE seal NOT using vacuum extraction: ~500 nanogram level of containment (ETWA 8 hours).
Valve with EPDM seal using vacuum extraction: ~0.4 nanogram level of containment (ETWA 8 hours).
Andocksysteme offers some key advantages:
- +/- 14mm docking tolerances on the X/Y axis,
- Planar (Y axis) offset >30mm (with cylinder system),
- Product contacting parts remove from active station in 1 minute - no air or electrical connections to remove.
High Containment Docking System (322 KB)
Standard Size Sampling Valve - 1" and 2"
Type 125A (2" size) and Type 130C (1" size) are the standard sampling valves by Famat, the world leader in sampling valve technology.
Used for sampling applications of powders, granules, pastes and liquids under process conditions in the pharmaceutical, chemical and food industries.
The valve features Famat's ultra-sanitary, long lasting patented piston system without any additional seals. The design is without question the finest on the market.
Operating Pressure & Vacuum: full vacuum up to 10 bar (145 psi).
Operating Temperature: from -20°C (-4°F) up to 180°C (360°F).
Piston Material: PTFE, PEEK, & VITON
Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.
Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you requireFamat Sampling Valves (2892 KB)
Get your product questions answered by a SERVOLiFT engineer!
- Product Code: