Quote cart is empty.

Sampling Valves

  • Sampling Valve - Horizontal Installation "Thief" sampling

    Print view

    Sampling Valve - Horizontal Installation "Thief" sampling
    Large image of Sampling Valve - Horizontal Installation "Thief" sampling
    • Product Code:

      STVAL-FAM130H

    • The 130H is a new product dedicated to the horizontal powder sampling such as would be installed into a vertical chute.

      The piston is intrusive and takes the sampling with special shaped chamber (Thief).

      The Technology used for the piston is the same as the standard patented expandable piston, ensuring tightness without gasket and no dead zone (except the sample chamber).

      The valve features Famat's ultra-sanitary, long lasting patented piston system without any additional seals. The design is without question the finest on the market.

      Operating Pressure & Vacuum: full vacuum up to 10 bar (145 psi).

      Operating Temperature:  from -20°C (-4°F) up to 180°C (360°F).

      Piston Material: PTFE, PEEK, & VITON

      Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.

      Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you require  

      Famat Sampling Valves Famat Sampling Valves (2892 KB)

      ...
    • Sample Type
    High Containment Docking Valve - Automatic
    supplier logo

    Andocksysteme offers a complete range of split butterfly valves and related systems for safe handling of potent compounds. The valves are offered in two seal type versions, depending on the containment level (or if solvents are used): White EPDM or white PTFE (teflon), both are FDA quality materials.

    Andocksysteme valves have been tested in three separate private studies in accordance with ISPE SMEPAC protocols (Abbott Labs, Hoffmann-La Roche, and Novartis) and have achieved the following results

    Valve with PTFE seal NOT using vacuum extraction: ~500 nanogram level of containment (ETWA 8 hours).

    Valve with EPDM seal using vacuum extraction: ~0.4 nanogram level of containment (ETWA 8 hours).

    Andocksysteme offers some key advantages:

    • +/- 14mm docking tolerances on the X/Y axis, 
    • Planar (Y axis) offset >30mm (with cylinder system), 
    • Product contacting parts remove from active station in 1 minute - no air or electrical connections to remove.

    High Containment Docking System High Containment Docking System (322 KB)

    High Containment Docking Valve - Manual
    supplier logo

    Andocksysteme offers a complete range of split butterfly valves and related systems for safe handling of potent compounds. The valves are offered in two seal type versions, depending on the containment level (or if solvents are used): White EPDM or white PTFE (teflon), both are FDA quality materials.

    Andocksysteme valves have been tested in three separate private studies in accordance with ISPE SMEPAC protocols (Abbott Labs, Hoffmann-La Roche, and Novartis) and have achieved the following results

    Valve with PTFE seal NOT using vacuum extraction: ~500 nanogram level of containment (ETWA 8 hours).

    Valve with EPDM seal using vacuum extraction: ~0.4 nanogram level of containment (ETWA 8 hours).

    Andocksysteme offers some key advantages:

    • +/- 14mm docking tolerances on the X/Y axis, 
    • Planar (Y axis) offset >30mm (with cylinder system), 
    • Product contacting parts remove from active station in 1 minute - no air or electrical connections to remove.

    High Containment Docking System High Containment Docking System (322 KB)

    Technical Specifications

    The 130H is a new product dedicated to the horizontal powder sampling such as would be installed into a vertical chute.

    The piston is intrusive and takes the sampling with special shaped chamber (Thief).

    The Technology used for the piston is the same as the standard patented expandable piston, ensuring tightness without gasket and no dead zone (except the sample chamber).

    The valve features Famat's ultra-sanitary, long lasting patented piston system without any additional seals. The design is without question the finest on the market.

    Operating Pressure & Vacuum: full vacuum up to 10 bar (145 psi).

    Operating Temperature:  from -20°C (-4°F) up to 180°C (360°F).

    Piston Material: PTFE, PEEK, & VITON

    Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.

    Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you require  

    Famat Sampling Valves Famat Sampling Valves (2892 KB)

    Get your product questions answered by a SERVOLiFT engineer!








    Email Phone



    Lifting & Handling
    Blending & Mixing
    Storage & Transfer
    Granulation & Coating
    Dosing & Weighing
    Cleaning & Drying

    - Please be as specific as possible.

    Captcha Image


    " />

    I would like to receive additional information on SERVOLiFT products and services.

  •