Quote cart is empty. |
- Blenders
- Cleaning Systems
- Coaters
- Compensators
- Conveyor Systems
- Dispensing Systems
- Drum Equipment
- Drum Handlers
- Drums
- Flanges
- ForkLifts
- Funnels & Flow Aids
- Granulation Equipment
- Granulation Systems
- IBCs
- Lifters
- Mobile Weighing
- Pallet Jacks
- Pallets
- Powder Transfer Systems
- Single-use Containment
- Tuggers / Movers
- Valves
- Vessels
Sampling Valves
45˚ Installation Sampling Valve
- Product Code:
STVAL-FAM130C-45
-
The 130C 45° is a variant of the standard 1" size model 130C valve. The body and the outlet...See Tech Specs Below
- Sample Type
High Containment Docking Valve - Automatic
Andocksysteme offers a complete range of split butterfly valves and related systems for safe handling of potent compounds. The valves are offered in two seal type versions, depending on the containment level (or if solvents are used): White EPDM or white PTFE (teflon), both are FDA quality materials.
Andocksysteme valves have been tested in three separate private studies in accordance with ISPE SMEPAC protocols (Abbott Labs, Hoffmann-La Roche, and Novartis) and have achieved the following results
Valve with PTFE seal NOT using vacuum extraction: ~500 nanogram level of containment (ETWA 8 hours).
Valve with EPDM seal using vacuum extraction: ~0.4 nanogram level of containment (ETWA 8 hours).
Andocksysteme offers some key advantages:
- +/- 14mm docking tolerances on the X/Y axis,
- Planar (Y axis) offset >30mm (with cylinder system),
- Product contacting parts remove from active station in 1 minute - no air or electrical connections to remove.
High Containment Docking System (322 KB)
45˚ Installation Sampling Valve
The 130C 45° is a variant of the standard 1" size model 130C valve.
The body and the outlet are at 45° orientated for optimum flow and easy sampling.
The flange of the body is at 45° oriented relative to the sampler, which ensures, combined with the 45° outlet, to have the bottle in a vertical position. In this configuration, the reactor, with the help of the blades is pushing the product directly in the sampler.
The valve features Famat's ultra-sanitary, long lasting patented piston system without any additional seals. The design is without question the finest on the market.
Operating Pressure & Vacuum: full vacuum up to 10 bar (145 psi).
Operating Temperature: from -20°C (-4°F) up to 180°C (360°F).
Piston Material: PTFE, PEEK, & VITON
Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.
Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you requireFamat Sampling Valves (2892 KB)
Get your product questions answered by a SERVOLiFT engineer!
- Product Code: