Quote cart is empty.

Sampling Valves

  • High Containment Sampling Valve
    supplier logo

    The Andocksysteme ASAM sampling system is a unique method for obtaining powder or liquid samples under very high containment conditions.

    ASAM 1 - "Jar" sample unit for larger sample capture.

    The system works similar to their split valve technology - eg. active and passive valves, however, in lieu of a butterfly valve, the ASAM system uses an active ball-half with a cup machined into the ball-half. When the active valve is closed, it forms a near-flush surface into the process equipment. The sample is captured into a small container, typically glass with a protective steel cage. The container is attached to a passive valve.

    ASAM 2 - Thief sample unit for small sample capture.

    Similar to the design of the ASAM 1 unit except there is no "cup" in the active ball-half to gather powder, instead the active ball-half has a small hole in which a powder thief can be inserted. The hole is made into the "side" of the ball, thus when the active ball-half is closed the hole is hidden away. The thief is held in a plastic tube-bag, which is joined.

    High Containment Docking System High Containment Docking System (322 KB)

  • Sampling Valve - Horizontal Installation
    supplier logo

    The 130H is a new product dedicated to the horizontal powder sampling such as would be installed into a vertical chute.

    The piston is intrusive and takes the sampling with special shaped chamber (Thief).

    The Technology used for the piston is the same as the standard patented expandable piston, ensuring tightness without gasket and no dead zone (except the sample chamber).

    The valve features Famat's ultra-sanitary, long lasting patented piston system without any additional seals. The design is without question the finest on the market.

    Operating Pressure & Vacuum: full vacuum up to 10 bar (145 psi).

    Operating Temperature:  from -20°C (-4°F) up to 180°C (360°F).

    Piston Material: PTFE, PEEK, & VITON

    Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.

    Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you require  

    Famat Sampling Valves Famat Sampling Valves (2892 KB)

  • Sampling Valve 1
    supplier logo

    Type 125A (2" size) and Type 130C (1" size) are the standard sampling valves by Famat, the world leader in sampling valve technology.

    Used for sampling applications of powders, granules, pastes and liquids under process conditions in the pharmaceutical, chemical and food industries.

    The valve features Famat's ultra-sanitary, long lasting patented piston system without any additional seals. The design is without question the finest on the market.

    Operating Pressure & Vacuum: full vacuum up to 10 bar (145 psi).

    Operating Temperature:  from -20°C (-4°F) up to 180°C (360°F).

    Piston Material: PTFE, PEEK, & VITON

    Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.

    Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you require 

    Famat Sampling Valves Famat Sampling Valves (2892 KB)

  • Sampling Valve Tool-Less Assembly (sanitary)
    supplier logo

    Type 125TC (2" size) and Type 130TC (1" size) are Famat's easy to clean sampling valves. They feature tool-less removal using a standard tri-clamp connection - a must for any application where cross contamination is important!

    The vavles are used for sampling applications of powders, granules, pastes and liquids under process conditions in the pharmaceutical, chemical and food industries.

    The valve features Famat's ultra-sanitary, long lasting patented piston system without any additional seals. The design is without question the finest on the market.

    Operating Pressure & Vacuum: full vacuum up to 10 bar (145 psi).

    Operating Temperature:  from -20°C (-4°F) up to 180°C (360°F).

    Piston Material: PTFE, PEEK, & VITON

    Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.

    Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you require 

    Famat Sampling Valves Famat Sampling Valves (2892 KB)

  • Sampling Valve with 45˚ installation
    supplier logo

    The 130C 45° is a variant of the standard 1" size model 130C valve.

    The body and the outlet are at 45° orientated for optimum flow and easy sampling.

    The flange of the body is at 45° oriented relative to the sampler, which ensures, combined with the 45° outlet, to have the bottle in a vertical position. In this configuration, the reactor, with the help of the blades is pushing the product directly in the sampler.

    The valve features Famat's ultra-sanitary, long lasting patented piston system without any additional seals. The design is without question the finest on the market.

    Operating Pressure & Vacuum: full vacuum up to 10 bar (145 psi).

    Operating Temperature:  from -20°C (-4°F) up to 180°C (360°F).

    Piston Material: PTFE, PEEK, & VITON

    Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.

    Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you require 

    Famat Sampling Valves Famat Sampling Valves (2892 KB)

  • Sampling Valve with Crust Breaking Feature
    supplier logo

    This valve is used for products which could plug inside the dryer or vessel and block the piston. To eliminate the risk of this impeding product flow into the sampling valve, Famat has developed the 125CC (2" size) and 130CC (1" size). With this kind of valve type, the crust will be broken by the piston before the sample is taken.

    The valve features Famat's ultra-sanitary, long lasting patented piston system without any additional seals. The design is without question the finest on the market.

    Operating Pressure & Vacuum: full vacuum up to 10 bar (145 psi).

    Operating Temperature:  from -20°C (-4°F) up to 180°C (360°F).

    Piston Material: PTFE, PEEK, & VITON

    Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.

    Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you require

    Famat Sampling Valves Famat Sampling Valves (2892 KB)

  • Sampling Valve with Near Infrared System (PAT)
    supplier logo

    Ideal for installation in a Fluid Bed Processor or Vacuum Drier when PAT needs to be used for process end-point determination.

    At the top of the piston, the 125NIR valve has a scraper which allows installation of a fiberoptic probe.This probe, ideally located, will measure several parameters such as temperature, pH, humidity… and / or composition of the product before taking the sample. A second hole, on the scraper (FIG. 2 ), is made nearby the fiberoptic probe for the cleaning system (Nitrogen) as shown on the picture. The measuring probe (not shown on picture) is cleaned through a nozzle with Nitrogen.

    The valve features Famat's ultra-sanitary, long lasting patented piston system without any additional seals. The design is without question the finest on the market.

    Piston Material: PTFE, PEEK, & VITON

    Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.

    Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you require

    Famat Sampling Valves Famat Sampling Valves (2892 KB)

  • Sampling Valve with Powered Actuation (automatic)
    supplier logo

    This valve is used for products which could plug inside the dryer or vessel and block the piston. To eliminate the risk of this impeding product flow into the sampling valve, Famat has developed the 125CC (2" size) and 130CC (1" size). With this kind of valve type, the crust will be broken by the piston before the sample is taken.

    The valve features Famat's ultra-sanitary, long lasting patented piston system without any additional seals. The design is without question the finest on the market.

    Operating Pressure & Vacuum: full vacuum up to 10 bar (145 psi).

    Operating Temperature:  from -20°C (-4°F) up to 180°C (360°F).

    Piston Material: PTFE, PEEK, & VITON

    Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.

    Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you require

    Famat Sampling Valves Famat Sampling Valves (2892 KB)

  • Sampling Valve with Split Valve (high containment)
    supplier logo

    To achieve a high containment of products during sampling operation is not easy. The 125OEL high containment sampling device allows you to do it.

    The valve features Andock Systems 2" Split Valve and Famat's patented, sanitary Piston System for a perfect solution to potent compound sampling!

    The OEL (Operator Exposure Limit) describes the maximum concentration of a drug substance which can be tolerated in the air of the production room without any negative effect to the health of the operators.

    OEL level we can offer :
    • < 1 µg / m3

    Container capacity : 250 ml (# 16 cu in)

    Tri-clamp connection : DN 50 or 2.5’’

    ADVANTAGES

        •    Quick dismantling for cleaning
(without tools) - incl. a cleaning device
        •    Compact dimensions
        •    No dead volumes
        •    AndockSystem split Valve

    Operating Pressure & Vacuum: full vacuum up to 10 bar (145 psi).

    Operating Temperature:  from -20°C (-4°F) up to 180°C (360°F).

    Piston Material: PTFE, PEEK, & VITON

    Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.

    Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you require 

    Famat Sampling Valves Famat Sampling Valves (2892 KB)

  • Sampling Valve with Stainless or Hastelloy Piston
    supplier logo

    The 135A sampling valve is equipped with a metallic piston (Stainless Steel or Hastelloy) for sampling process up to 330°C (572° F). FDA certified up to 260°C.

    Unlike the PTFE or PEEK piston, the metal piston has a high temperature gasket around it.

    To avoid any damage when closing the piston, the gasket is recessed into the piston and seals against the valve cylinder
wall making contact only after the final sealing turn of the handwheel.

    Tightness from full vacuum up to 10 bar (145 psi).

    Standard Finish: internal roughness is Ra ≤ 0.8 µm and the external is Ra ≤ 3.2 µm.

    Connection to your process equipment: ANSI Flange, DIN Flange, Custom Flange, Tri-Clamp or any other you require 

    Famat Sampling Valves Famat Sampling Valves (2892 KB)

  •