Quote cart is empty.

Cleaning Systems

  • Cleaning Chamber

    Print view

    Cleaning Chamber
    Large image of Cleaning Chamber
    • Product Code:

      CDCHW-SESTA

    • Servolift manufactured Chamber Washing Systems are the most advanced available on the market today. They are specifically designed for the validated cleaning and drying of containers in pharmaceutical validated processes..

      Each Servolift system is custom built per the application requirements, such as installation layout, container sizes and process parameters.

      FEATURES:

      • Validatable washing system with 99 programmable recipes
      • Validatable washing and drying with CIP of entire chamber.
      • Combined washing drying in one chamber or separated into two chambers for high throughput.
      • For all container and accessory types: Drums, Bins, Pallets, Valves, Lids and Valves.
      • Pass through (clean side / dirty side) or one sided entry.
      • Fully automatic controls with analog recording of all process parameters.
      • Automatic loading and handling systems such as accumulating sanitary roller conveyor for Bins.
      • Recycling wash water system with automatic CIP and detergent dosing.

      Chamber Washing Systems Chamber Washing Systems (653 KB)

      ...
    • Special Instructions
    Drying Station
    supplier logo

    The SERVOLiFT IBC Drying Station is a separate drying system for IBC containers that completes the entire cleaning process.

    Drying takes place in a GMP area where wet IBC containers are manually placed in the Drying Station and dried controlled by a timer.  

    This complete unit guarantees drying in the shortest time with the smallest energy consumption.

    The system is based on recirculation of necessary air flow for drying, which is heated up to drying temperature.  The supply / exhaust air flow amount is limited to a maximum rate of 20-40% of total flow for optimization of energy consumption.

    The supply air is prepared for hygienical use by passing a 2-step-filter system with class F9/H13.  All parts in contact with the drying air are out of AISI 316 / AISI 316 Ti or AISI 304, and the sealings conform to FDA-guidlines.

    CIP Mobile Cleaning System
    supplier logo

    SERVOLiFT Validatable Mobile Washing Systems are designed as a stand-alone, clean-in-place system and is an ideal system for washing bins and drums without the complexity, maintenance and validation issues of a chamber washing system.

    The system will work with all bin and drum types and offers programmable washing and drying cycles for all your different products.

    The Servolift Washing Station is manufactured to the highest standards of quality and is totally flexible to your washing application and facility installation.

    • Validatable washing system with 99 programmable recipes
    • Simplest installation: Set in-place, connect the utilities and start running
    • Easiest validation: Simplicity of system allows for the fastest possible validation of system
    • Allen Bradley PLC controls or Simply relay logics
    • Quadruple washing system: Pre-washing, Main washing, Pre-Rinsing and Final Rinsing
    • Optional heated buffer tank, electrical or steam
    • One or two Detergent dosing system with variable frequency drive for accurate control
    • Dual channel spray systems to separate the washing and rinsing water

    The Servolift Cleaning Systems product line consists of simple drum cleaning racks, mobile cleaning stations and complex chamber systems.

    Servolift equipment shows a GMP correct design and safety standard, based on the most strict rules of Germany and Europe:

    • Hygienic requirements
    • Materials and surface for product / water contact parts according GMP / FDA requirements
    • Programming / documentation according GAMP 4 or 5
    • Quality according DIN ISO 9000 approved
    • Custom made design

    Washing Stations Washing Stations (266 KB)


    Washing Station - Stationary
    supplier logo

    The Servolift Stationary Washing Station with Washing Head for Bins lifts, lowers, swivels and transverses. It is an ideal system for washing bins without the complexity, maintenance and validation issues of a chamber washing system.

    The system will work with all bin types and offers programmable washing and drying cycles for all your different products.

    The Servolift Washing Station is manufactured to the highest standards of quality and is totally flexible to your washing application and facility installation.

    • Validatable washing system with 99 programmable recipes
    • Simplest installation: Set in-place, connect the utilities and start running
    • Easiest validation: Simplicity of system allows for the fastest possible validation of system
    • Allen Bradley PLC controls or Simply relay logics
    • Quadruple washing system: Pre-washing, Main washing, Pre-Rinsing and Final Rinsing
    • Heated buffer tank, electrical or steam
    • Detergent dosing system with variable frequency drive for accurate control
    • Dual channel spray systems to separate the washing and rinsing water

    Servolift equipment shows a GMP correct design and safety standard, based on the most strict rules of Germany and Europe:

    • Hygienic requirements
    • Materials and surface for product / water contact parts according GMP / FDA requirements
    • Programming / documentation according GAMP 4 or 5
    • Quality according DIN ISO 9000 approved
    • Custom made design

    • Washing Stations Washing Stations (266 KB)


    Technical Specifications

    Servolift manufactured Chamber Washing Systems are the most advanced available on the market today. They are specifically designed for the validated cleaning and drying of containers in pharmaceutical validated processes..

    Each Servolift system is custom built per the application requirements, such as installation layout, container sizes and process parameters.

    FEATURES:

    • Validatable washing system with 99 programmable recipes
    • Validatable washing and drying with CIP of entire chamber.
    • Combined washing drying in one chamber or separated into two chambers for high throughput.
    • For all container and accessory types: Drums, Bins, Pallets, Valves, Lids and Valves.
    • Pass through (clean side / dirty side) or one sided entry.
    • Fully automatic controls with analog recording of all process parameters.
    • Automatic loading and handling systems such as accumulating sanitary roller conveyor for Bins.
    • Recycling wash water system with automatic CIP and detergent dosing.

    Chamber Washing Systems Chamber Washing Systems (653 KB)

    Get your product questions answered by a SERVOLiFT engineer!








    Email Phone



    Lifting & Handling
    Blending & Mixing
    Storage & Transfer
    Granulation & Coating
    Dosing & Weighing
    Cleaning & Drying

    - Please be as specific as possible.

    Captcha Image


    I would like to receive additional information on SERVOLiFT products and services.

  •