Quote cart is empty.

Double Cone Blenders

  • Conical Blender - Laboratory

    Print view

    Conical Blender - Laboratory
    Large image of Conical Blender - Laboratory
    • Product Code:

      BMDCO-AMLAB

    • Laboratory Conical Blenders are ultra sanitary for gentle, homogenous blending.

      The folding, spreading, and cascading action of the Conical Blender provides a rapid, homogeneous blending of dry and semi dry materials. The end over end revolving action, moving materials in and out of a restricted area results in a thorough intermeshed of the products into a uniform mix.

      When required Conical Blenders can be equipped with a solids intensifier bar for disintegrating lumps or agglomerates and for dispersing minor ingredients. With the addition of a rotary union and liquid feed tube, the agitator assembly can incorporate minute quantities of finely dispersed mist through the agitator discs into the product mix.

      For dispersion of viscous liquids, special spray nozzle assemblies can be fitted enabling precise control of droplet size with independent control of the solids intensifier bar.

      Batch working capacities range from 1 cubic foot to 250 cubic feet based on fill level of 55% of total volume.

      Each blender design is customized to suit the customer's specific requirements.

      For improved blend uniformity, special designs incorporating internal deflector cones, or angled shell bodies are available upon request.

      Convertible models are available for the customer who does not have an immediate requirement for use of an agitator but has the possibility for future applications. This design includes a pre-machined blender idler shaft to accept bearing, seal assembly, and insertion of the agitator assembly. The Idler shaft hub ends are supplied with stainless steel caps and a motor base plate is installed on the support frame for future installation of the agitator drive. At the time of conversion, the agitator assembly complete with bearing and seal assemblies, motor, V-belt drive, and guard are furnished for installation without disrupting the equipment.

      Conical and V Shell Blenders Conical and V Shell Blenders (564 KB)

      Conical and V-Blender Specifications-Lab Conical and V-Blender Specifications-Lab (139 KB)

      ...
    Conical Blender - Portable
    supplier logo

    A&M Portable Conical Blender for 1 to 5 cubic feet.

    The folding, spreading, and cascading action of the Conical Blender provides a rapid, homogeneous blending of dry and semi dry materials. The end over end revolving action, moving materials in and out of a restricted area results in a thorough intermeshed of the products into a uniform mix.

    When required Conical Blenders can be equipped with a solids intensifier bar for disintegrating lumps or agglomerates and for dispersing minor ingredients. With the addition of a rotary union and liquid feed tube, the agitator assembly can incorporate minute quantities of finely dispersed mist through the agitator discs into the product mix.

    For dispersion of viscous liquids, special spray nozzle assemblies can be fitted enabling precise control of droplet size with independent control of the solids intensifier bar.

    Batch working capacities range from 1 cubic foot to 250 cubic feet based on fill level of 55% of total volume.

    Each blender design is customized to suit the customer's specific requirements.

    For improved blend uniformity, special designs incorporating internal deflector cones, or angled shell bodies are available upon request.

    Convertible models are available for the customer who does not have an immediate requirement for use of an agitator but has the possibility for future applications. This design includes a pre-machined blender idler shaft to accept bearing, seal assembly, and insertion of the agitator assembly. The Idler shaft hub ends are supplied with stainless steel caps and a motor base plate is installed on the support frame for future installation of the agitator drive. At the time of conversion, the agitator assembly complete with bearing and seal assemblies, motor, V-belt drive, and guard are furnished for installation without disrupting the equipment.

    A&M Conical Blenders can be furnished with a PLC controlled, automated drum loading system. With one full revolution of the blender, the entire contents of a product container (fiber, plastic or stainless steel drum) can be transferred into the blender and back into drums after mixing, in a dust-free operation. This system eliminates costly mezzanine platforms, and other feed systems which require special docking mechanisms that create risk of spillage.

    During loading, the operator simply rolls the drum onto the roller conveyor, raises the lift cylinders to squeeze the drum against the valve discharge flange seal, and initiates the load cycle. The blender slowly rotates one revolution while automatically opening and closing the valve, and stopping at the zero position. The empty drum is lowered, and replaced with a full container to repeat the cycle until all contents are charged.

    During discharging, an empty drum is positioned on the roller conveyor and sealed against the valve discharge flange seal. The operator opens/closes the valve to fill the drum, lowers the drum, and replaces with an empty drum to repeat the cycle until all contents have been discharged.

    Standard design features of the ADL system include:

    • PLC controlled, fully automatic load and discharge functions.
    • Operator station supplied in NEMA 4X stainless steel, watertight construction with "Touch Screen" operator interface display incorporating blend timers.
    • All stainless steel roller conveyor and instrumentation tubing.
    • Adjustable positioning cams with proximity sensors.
    • Pneumatic controls supplied in NEMA 4X stainless steel, watertight construction, pre-mounted to blender frame (or for remote mounting, as desired). Contains all pneumatic valves with pushbutton control for raising/lowering lift cylinders, and opening/closing discharge valve. Operator is removed from the lift platform area for safe operation.
    • Sanitary butterfly discharge valve is clamped to the blender outlet for quick disassembly and with quick release design for ease of cleaning and maintenance. Valve flange seal can be customized to suit the customer's product container.
    • FDA quality drum flange seal can be easily removed from machined valve flange.
    • Special PLC programming with safety interlocks for optimum operator safety.
    • Shaft-mounted gear motor installed via shrink disc coupler eliminates maintenance of traditional gear drive. Speed regulation via AC variable frequency.

    Conical and V Shell Blenders Conical and V Shell Blenders (564 KB)

    Conical and V-Blenders Specifications-Portable Conical and V-Blenders Specifications-Portable (134 KB)

    Ribbon and Paddle Blender
    supplier logo

    A&M Ribbon and Paddle Blenders are scientifically engineered, customized blenders, used for over 80 years for Food, Dairy, Pharmaceutical, Chemical, Plastics, and other industry processing. Each blender is customized to suit its intended application.

    The balanced ribbon design assures a constant and complete mixing action, while preventing product build up and minimal degradation. This positive mix action is based on multiple mixing of the feed product incorporating tumbling, shearing and horizontal displacement of every particle. The outer ribbons convey the material to the center or discharge point, while the inner ribbons move the material in the opposite direction for thorough end to end mixing.

    Paddle agitators are specially designed to lift, scoop, and tumble materials in a gentle, but thorough "figure 8" mixing action.  This agitator design is ideal for mixing fragile or abrasive ingredients, and for mixing solids or liquids of various particle size, share and density.

    Robust Construction:

    A & M Ribbon Blenders are available in batch working capacities from 1 cubic foot to 380 cubic feet for light, medium and heavy duty blending of powders, pastes, emulsions, and liquids. While A & M has specialized in the manufacture of sanitary stainless steel blenders, other materials of construction are also available including carbon steel, abrasion resistant steel, and other special nickel alloys.

    The "U" shaped blender shell is a one piece, all welded construction with radiused corners. Ribbon assembly is a three piece construction with bolted coupling flanges for ease of removal of the center ribbon section through the shell top. Agitators are supported on self-aligning, roller bearings in outboard, pillow block housings. Shafts are sealed with a robust stuffing box packing gland. The entire blender is supported on heavy, tubular legs with cross ties.

    Dependent on application and customer’s needs, selection of drive type, cover design, valve selection, etc. is customized for each individual blender. A diversified range of peripheral equipment can be incorporated into a complete system, including: filtered bag dump stations, sifters, lump breakers, feed and discharge conveyors, mezzanine platforms, weigh scale hoppers, etc.

    Sanitary Design:

    To meet today’s more stringent sanitary requirements in the food and pharmaceutical industry, close attention is given to ensure our equipment satisfies strict GMP standards. All interior welds are continuous, free from cracks and crevices, radiused (1/4" minimum), and ground smooth to a No. 4 (180 grit) finish. Agitators are one piece, solid round bar construction. Shaft seals are split design for ease of maintenance, are constructed entirely of stainless steel, and supplied with either FDA approved Teflon braided packing, or Pure PTFE Chevron seals. Equipment is fully passivated after fabrication. Material certifications supplied.

    Options:

    • High Speed Chopper
    • Agitator Designs (Ribbon/Paddle/Double Ribbon, etc.)
    • Jacketed Systems
    • Automatic Lid systems and tipping blenders

    Ribbon and Paddle Blenders Ribbon and Paddle Blenders (1112 KB)

    Technical Specifications

    Laboratory Conical Blenders are ultra sanitary for gentle, homogenous blending.

    The folding, spreading, and cascading action of the Conical Blender provides a rapid, homogeneous blending of dry and semi dry materials. The end over end revolving action, moving materials in and out of a restricted area results in a thorough intermeshed of the products into a uniform mix.

    When required Conical Blenders can be equipped with a solids intensifier bar for disintegrating lumps or agglomerates and for dispersing minor ingredients. With the addition of a rotary union and liquid feed tube, the agitator assembly can incorporate minute quantities of finely dispersed mist through the agitator discs into the product mix.

    For dispersion of viscous liquids, special spray nozzle assemblies can be fitted enabling precise control of droplet size with independent control of the solids intensifier bar.

    Batch working capacities range from 1 cubic foot to 250 cubic feet based on fill level of 55% of total volume.

    Each blender design is customized to suit the customer's specific requirements.

    For improved blend uniformity, special designs incorporating internal deflector cones, or angled shell bodies are available upon request.

    Convertible models are available for the customer who does not have an immediate requirement for use of an agitator but has the possibility for future applications. This design includes a pre-machined blender idler shaft to accept bearing, seal assembly, and insertion of the agitator assembly. The Idler shaft hub ends are supplied with stainless steel caps and a motor base plate is installed on the support frame for future installation of the agitator drive. At the time of conversion, the agitator assembly complete with bearing and seal assemblies, motor, V-belt drive, and guard are furnished for installation without disrupting the equipment.

    Conical and V Shell Blenders Conical and V Shell Blenders (564 KB)

    Conical and V-Blender Specifications-Lab Conical and V-Blender Specifications-Lab (139 KB)

    Get your product questions answered by a SERVOLiFT engineer!








    Email Phone



    Lifting & Handling
    Blending & Mixing
    Storage & Transfer
    Granulation & Coating
    Dosing & Weighing
    Cleaning & Drying

    - Please be as specific as possible.

    Captcha Image


    I would like to receive additional information on SERVOLiFT products and services.

  •