Quote cart is empty.

Double Cone Blenders

  • Conical Blender - Laboratory
    supplier logo

    Laboratory Conical Blenders are ultra sanitary for gentle, homogenous blending.

    The folding, spreading, and cascading action of the Conical Blender provides a rapid, homogeneous blending of dry and semi dry materials. The end over end revolving action, moving materials in and out of a restricted area results in a thorough intermeshed of the products into a uniform mix.

    When required Conical Blenders can be equipped with a solids intensifier bar for disintegrating lumps or agglomerates and for dispersing minor ingredients. With the addition of a rotary union and liquid feed tube, the agitator assembly can incorporate minute quantities of finely dispersed mist through the agitator discs into the product mix.

    For dispersion of viscous liquids, special spray nozzle assemblies can be fitted enabling precise control of droplet size with independent control of the solids intensifier bar.

    Batch working capacities range from 1 cubic foot to 250 cubic feet based on fill level of 55% of total volume.

    Each blender design is customized to suit the customer's specific requirements.

    For improved blend uniformity, special designs incorporating internal deflector cones, or angled shell bodies are available upon request.

    Convertible models are available for the customer who does not have an immediate requirement for use of an agitator but has the possibility for future applications. This design includes a pre-machined blender idler shaft to accept bearing, seal assembly, and insertion of the agitator assembly. The Idler shaft hub ends are supplied with stainless steel caps and a motor base plate is installed on the support frame for future installation of the agitator drive. At the time of conversion, the agitator assembly complete with bearing and seal assemblies, motor, V-belt drive, and guard are furnished for installation without disrupting the equipment.

    Conical and V Shell Blenders Conical and V Shell Blenders (564 KB)

    Conical and V-Blender Specifications-Lab Conical and V-Blender Specifications-Lab (139 KB)

  • Conical Blender - Portable
    supplier logo

    A&M Portable Conical Blender for 1 to 5 cubic feet.

    The folding, spreading, and cascading action of the Conical Blender provides a rapid, homogeneous blending of dry and semi dry materials. The end over end revolving action, moving materials in and out of a restricted area results in a thorough intermeshed of the products into a uniform mix.

    When required Conical Blenders can be equipped with a solids intensifier bar for disintegrating lumps or agglomerates and for dispersing minor ingredients. With the addition of a rotary union and liquid feed tube, the agitator assembly can incorporate minute quantities of finely dispersed mist through the agitator discs into the product mix.

    For dispersion of viscous liquids, special spray nozzle assemblies can be fitted enabling precise control of droplet size with independent control of the solids intensifier bar.

    Batch working capacities range from 1 cubic foot to 250 cubic feet based on fill level of 55% of total volume.

    Each blender design is customized to suit the customer's specific requirements.

    For improved blend uniformity, special designs incorporating internal deflector cones, or angled shell bodies are available upon request.

    Convertible models are available for the customer who does not have an immediate requirement for use of an agitator but has the possibility for future applications. This design includes a pre-machined blender idler shaft to accept bearing, seal assembly, and insertion of the agitator assembly. The Idler shaft hub ends are supplied with stainless steel caps and a motor base plate is installed on the support frame for future installation of the agitator drive. At the time of conversion, the agitator assembly complete with bearing and seal assemblies, motor, V-belt drive, and guard are furnished for installation without disrupting the equipment.

    A&M Conical Blenders can be furnished with a PLC controlled, automated drum loading system. With one full revolution of the blender, the entire contents of a product container (fiber, plastic or stainless steel drum) can be transferred into the blender and back into drums after mixing, in a dust-free operation. This system eliminates costly mezzanine platforms, and other feed systems which require special docking mechanisms that create risk of spillage.

    During loading, the operator simply rolls the drum onto the roller conveyor, raises the lift cylinders to squeeze the drum against the valve discharge flange seal, and initiates the load cycle. The blender slowly rotates one revolution while automatically opening and closing the valve, and stopping at the zero position. The empty drum is lowered, and replaced with a full container to repeat the cycle until all contents are charged.

    During discharging, an empty drum is positioned on the roller conveyor and sealed against the valve discharge flange seal. The operator opens/closes the valve to fill the drum, lowers the drum, and replaces with an empty drum to repeat the cycle until all contents have been discharged.

    Standard design features of the ADL system include:

    • PLC controlled, fully automatic load and discharge functions.
    • Operator station supplied in NEMA 4X stainless steel, watertight construction with "Touch Screen" operator interface display incorporating blend timers.
    • All stainless steel roller conveyor and instrumentation tubing.
    • Adjustable positioning cams with proximity sensors.
    • Pneumatic controls supplied in NEMA 4X stainless steel, watertight construction, pre-mounted to blender frame (or for remote mounting, as desired). Contains all pneumatic valves with pushbutton control for raising/lowering lift cylinders, and opening/closing discharge valve. Operator is removed from the lift platform area for safe operation.
    • Sanitary butterfly discharge valve is clamped to the blender outlet for quick disassembly and with quick release design for ease of cleaning and maintenance. Valve flange seal can be customized to suit the customer's product container.
    • FDA quality drum flange seal can be easily removed from machined valve flange.
    • Special PLC programming with safety interlocks for optimum operator safety.
    • Shaft-mounted gear motor installed via shrink disc coupler eliminates maintenance of traditional gear drive. Speed regulation via AC variable frequency.

    Conical and V Shell Blenders Conical and V Shell Blenders (564 KB)

    Conical and V-Blenders Specifications-Portable Conical and V-Blenders Specifications-Portable (134 KB)

  • Conical Blender - Production
    supplier logo

    A&M Production Size Conical Blender.

    The folding, spreading, and cascading action of the Conical Blender provides a rapid, homogeneous blending of dry and semi dry materials. The end over end revolving action, moving materials in and out of a restricted area results in a thorough intermeshed of the products into a uniform mix.

    When required Conical Blenders can be equipped with a solids intensifier bar for disintegrating lumps or agglomerates and for dispersing minor ingredients. With the addition of a rotary union and liquid feed tube, the agitator assembly can incorporate minute quantities of finely dispersed mist through the agitator discs into the product mix.

    For dispersion of viscous liquids, special spray nozzle assemblies can be fitted enabling precise control of droplet size with independent control of the solids intensifier bar.

    Batch working capacities range from 1 cubic foot to 250 cubic feet based on fill level of 55% of total volume.

    Each blender design is customized to suit the customer's specific requirements.

    For improved blend uniformity, special designs incorporating internal deflector cones, or angled shell bodies are available upon request.

    Convertible models are available for the customer who does not have an immediate requirement for use of an agitator but has the possibility for future applications. This design includes a pre-machined blender idler shaft to accept bearing, seal assembly, and insertion of the agitator assembly. The Idler shaft hub ends are supplied with stainless steel caps and a motor base plate is installed on the support frame for future installation of the agitator drive. At the time of conversion, the agitator assembly complete with bearing and seal assemblies, motor, V-belt drive, and guard are furnished for installation without disrupting the equipment.

    A&M Conical Blenders can be furnished with a PLC controlled, automated drum loading system. With one full revolution of the blender, the entire contents of a product container (fiber, plastic or stainless steel drum) can be transferred into the blender and back into drums after mixing, in a dust-free operation. This system eliminates costly mezzanine platforms, and other feed systems which require special docking mechanisms that create risk of spillage.

    During loading, the operator simply rolls the drum onto the roller conveyor, raises the lift cylinders to squeeze the drum against the valve discharge flange seal, and initiates the load cycle. The blender slowly rotates one revolution while automatically opening and closing the valve, and stopping at the zero position. The empty drum is lowered, and replaced with a full container to repeat the cycle until all contents are charged.

    During discharging, an empty drum is positioned on the roller conveyor and sealed against the valve discharge flange seal. The operator opens/closes the valve to fill the drum, lowers the drum, and replaces with an empty drum to repeat the cycle until all contents have been discharged.

    Standard design features of the ADL system include:

    • PLC controlled, fully automatic load and discharge functions.
    • Operator station supplied in NEMA 4X stainless steel, watertight construction with "Touch Screen" operator interface display incorporating blend timers.
    • All stainless steel roller conveyor and instrumentation tubing.
    • Adjustable positioning cams with proximity sensors.
    • Pneumatic controls supplied in NEMA 4X stainless steel, watertight construction, pre-mounted to blender frame (or for remote mounting, as desired). Contains all pneumatic valves with pushbutton control for raising/lowering lift cylinders, and opening/closing discharge valve. Operator is removed from the lift platform area for safe operation.
    • Sanitary butterfly discharge valve is clamped to the blender outlet for quick disassembly and with quick release design for ease of cleaning and maintenance. Valve flange seal can be customized to suit the customer's product container.
    • FDA quality drum flange seal can be easily removed from machined valve flange.
    • Special PLC programming with safety interlocks for optimum operator safety.
    • Shaft-mounted gear motor installed via shrink disc coupler eliminates maintenance of traditional gear drive. Speed regulation via AC variable frequency.

    Conical and V Shell Blenders Conical and V Shell Blenders (564 KB)

  • Double Cone Lift Blender
    supplier logo

    The folding, spreading, and cascading action of the Double Cone Blender provides a rapid, homogeneous blending of dry and semi dry materials. The end over end revolving action, moving materials in and out of a restricted area results in a thorough intermeshed of the products into a uniform mix.

    When required Double Cone Blenders can be equipped with a solids intensifier bar for disintegrating lumps or agglomerates and for dispersing minor ingredients.  With the addition of a rotary union and liquid feed tube, the agitator assembly can incorporate minute quantities of finely dispersed mist through the agitator discs into the product mix.

    For dispersion of viscous liquids, special spray nozzle assemblies can be fitted enabling precise control of droplet size with independent control of the solids intensifier bar.

    Batch working capacities range from 1 cubic foot to 250 cubic feet based on fill level of 55% of total volume.

    Each blender design is customized to suit the customer's specific requirements.

    For improved blend uniformity, special designs incorporating internal deflector cones, or angled shell bodies are available upon request.

    Convertible models are available for the customer who does not have an immediate requirement for use of an agitator but has the possibility for future applications. This design includes a pre-machined blender idler shaft to accept bearing, seal assembly, and insertion of the agitator assembly.  The idler shaft hub ends are supplied with stainless steel caps and a motor base plate is installed on the support frame for future installation of the agitator drive. bAt the time of conversion, the agitator assembly complete with bearing and seal assemblies, motor, V-belt drive, and guard are furnished for installation without disrupting the equipment.

  •