Quote cart is empty.

Bins (IBCs) for Solids

  • Bin (IBC) - Square and Rectangular

    Print view

    Bin (IBC) - Square and Rectangular
    Large image of Bin (IBC) - Square and Rectangular
    • Product Code:

      STBIN-SESQR

    • Intermediate Bulk Containers (IBCs) are made to specification in standard capacities ranging from 0.5-liters to 4000-liters in round, rectangular and square geometries. We also offer fully customized solutions for more demanding applications such as high containment systems. 

      The corners of our square IBCs, whether 5-liters or 3000-liters are always made with a 2” radius to allow for the easy cleaning, insuring that cross contamination is not caused by the IBC. Interior and exterior welds are ground smooth and flush to the sheeting surface. We certify the interior finish to a Ra 15 micro-inch standard, although we can supply finishing to any specification. 

      Our quality welding allows for a perfect appearance after grinding and polishing. We also offer a complete line of manways and ports. For pharmaceutical applications we generally use our lightweight stamped lid system which is not only easy to remove and clean, but also weighs very little. Clamping is made simple by a one-piece over-center clamping ring with safety-tamper lock. Manway rings come in several styles, including a super clean fully welded design fitted to the bin top. Manway lids are available in standard sizes with both sanitary and low-cost designs.

      Bin frames are made from totally enclosed tubing and offered with round vertical legs or square tubing and white recessed plastic feet so floors are not damaged during handling.

      TYPICAL SQUARE IBC SIZES
      CAPACITY DIM A DIM B DIM C
      600 49" 48" 48"
      800 54" 48" 48"
      1000 60" 48" 48"
      1200 66" 48" 48"
      1400 72" 48" 48"
      1600 78" 48" 48"
      1800 84" 48" 48"
      2000 90" 48" 48"
      2200 96" 48" 48"
      2400 101" 48" 48"
      2600 107" 48" 48"
      2800 90" 54" 54"
      3000 95" 54" 54"

      Bins (IBCs) Bins (IBCs) (1646 KB)

      ...
    • Capacity (liters)
      Manway Lids (inches)
      Frames
      Round Verticals
      Square Tubing
    IBC Bin Blender - Laboratory
    supplier logo

    The Servolift desktop unit is a perfect machine to run small batches on. The unit is sized to place on a work desk or a small rolling cart.

    Servolift's Research and Pilot size IBC Blending Systems provide the correct tools to insure the scale up viability not only through pilot studies, but also to Full Scale Production.

    IBC Blending Systems Research and Pilot Size IBC Blending Systems Research and Pilot Size (1551 KB)

    IBC Bin Blender and Lifter - Mobile
    supplier logo

    Mobile unit for 0.5 Liters to 500 Liters batches with Lifting and Lowering System. This unit is one of many of our custom portable and stationary designs with every option imaginable offered to meet the demands of every application.

    All of our machines can also blend Drums and V-Shells.

    We offer complete handling solutions behind our systems to aid your operators in both ergonomic handling and containment.

    As many potent compounds require smaller batch sizes in full production, we offer stationary blending systems, which are just smaller full sized Servolift blenders.

    Clamping systems range from simple “tri- clamp” style manual connections to fully automatic powered systems - whatever suits your needs we can supply.

    IBC Blending Systems Research and Pilot Size IBC Blending Systems Research and Pilot Size (1551 KB)

    IBC Bin Blender and Lifter - Stationary
    supplier logo

    Lifter blenders were invented by Servolift 30 years ago and today we are still at the forefront of this innovative technology.  By combining a standard Servolift Lifting Column and our Strandard Cantilevered Blending Drive, you can create a machine that will allow you to perform both filling and discharging steps that otherwise would have to happen with additional equipment.

    To date we have built several hundred of these machines and thus offer our clients security in knowning that they are purchasing a proven system.

    Most systems we build use our side arm clamping system, however, we also make lifter blenders with cage clamping design.

    IBC Blending Systems Production Size IBC Blending Systems Production Size (1246 KB)

    Mobile Bin Lifter (Drive)
    supplier logo

    Servolift IBC (bin) movers for handling anything that requires a hygienic forklift. We have produced several hundred of these machines to date in both manual (pushed) and power (driven). We can also offer explosion proof versions for both powder and solvent areas.

    Design Capabilities:

    • Lifting Capacity to 12,000 lbs, 
    • Lifting Heights to 15', 
    • One, Two or Three stage lifting columns, 
    • Overhang (reach) to 84', 
    • Explosion proof for all classes and divisions, 
    • Cleanroom ready to Class 100, 
    • Full Washdown, 
    • Stainless Steel 304 or 316L, 
    • Any level of finish, 
    • Powered drive or manual push, 
    • Battery Power, Pneumatic Power or Plug-in Electrical Power, 
    • 100% customizable for any possible application, 
    • Load Cells can be installed into the arm system for weighing operations.

    Bin Lifter - Mobile Bin Lifter - Mobile (1220 KB)

    Mobile Bin Lifter (Push)
    supplier logo

    Servolift IBC (bin) movers for handling anything that requires a hygienic forklift. We have produced several hundred of these machines to date in both manual (pushed) and power (driven). We can also offer explosion proof versions for both powder and solvent areas.

    Design Capabilities:

    • Lifting Capacity to 12,000 lbs, 
    • Lifting Heights to 15', 
    • One, Two or Three stage lifting columns, 
    • Overhang (reach) to 84', 
    • Explosion proof for all classes and divisions, 
    • Cleanroom ready to Class 100, 
    • Full Washdown, 
    • Stainless Steel 304 or 316L, 
    • Any level of finish, 
    • Powered drive or manual push, 
    • Battery Power, Pneumatic Power or Plug-in Electrical Power, 
    • 100% customizable for any possible application, 
    • Load Cells can be installed into the arm system for weighing operations.

    Bin Lifter - Mobile Bin Lifter - Mobile (1220 KB)

    Technical Specifications

    Intermediate Bulk Containers (IBCs) are made to specification in standard capacities ranging from 0.5-liters to 4000-liters in round, rectangular and square geometries. We also offer fully customized solutions for more demanding applications such as high containment systems. 

    The corners of our square IBCs, whether 5-liters or 3000-liters are always made with a 2” radius to allow for the easy cleaning, insuring that cross contamination is not caused by the IBC. Interior and exterior welds are ground smooth and flush to the sheeting surface. We certify the interior finish to a Ra 15 micro-inch standard, although we can supply finishing to any specification. 

    Our quality welding allows for a perfect appearance after grinding and polishing. We also offer a complete line of manways and ports. For pharmaceutical applications we generally use our lightweight stamped lid system which is not only easy to remove and clean, but also weighs very little. Clamping is made simple by a one-piece over-center clamping ring with safety-tamper lock. Manway rings come in several styles, including a super clean fully welded design fitted to the bin top. Manway lids are available in standard sizes with both sanitary and low-cost designs.

    Bin frames are made from totally enclosed tubing and offered with round vertical legs or square tubing and white recessed plastic feet so floors are not damaged during handling.

    TYPICAL SQUARE IBC SIZES
    CAPACITY DIM A DIM B DIM C
    600 49" 48" 48"
    800 54" 48" 48"
    1000 60" 48" 48"
    1200 66" 48" 48"
    1400 72" 48" 48"
    1600 78" 48" 48"
    1800 84" 48" 48"
    2000 90" 48" 48"
    2200 96" 48" 48"
    2400 101" 48" 48"
    2600 107" 48" 48"
    2800 90" 54" 54"
    3000 95" 54" 54"

    Bins (IBCs) Bins (IBCs) (1646 KB)

    Get your product questions answered by a SERVOLiFT engineer!








    Email Phone



    Lifting & Handling
    Blending & Mixing
    Storage & Transfer
    Granulation & Coating
    Dosing & Weighing
    Cleaning & Drying

    - Please be as specific as possible.

    Captcha Image


    I would like to receive additional information on SERVOLiFT products and services.

  •